Brick Brace Full Set, Strong,boys, Acrow, Prop, Mate, Lintel, Building Profile. READ OUR 2019 PROPPING GUIDE & FEEDBACK!!!!!!!!!!!!!!!!

EUR 324,80 Nu Kopen 14d 23h, EUR 19,08 Verzending, 30-Day Teruggaven, Betaal met PayPal en u bent volledig beschermd.

Verkoper: brickbrace (939) 98.9%, Objectlocatie: Ickenham Uxbridge, Middlesex, Verzending naar: GB en vele andere landen, Objectnummer: 263577208418 THE AWARD WINNING BRICK BRACE SAFETY SYSTEMONLY £290.00Includes 12 safety tools, 12 hooks, 6 half coupler's, anchor bolts, written guidance, the Brick Brace masonry weight awareness chart & free delivery within the UK.(Scaffold tube not included) –PLEASE READ IN FULLThe stability & strength of masonry is unknown and varies upon every task of which depends on the mortar mix, the quality and the age of the masonry. The fully tested Brick Brace safety tool increases the unknown variable strength of masonry to 40Nm which through testing is proven to be strong and stable enough to prevent minor & major collapse during alterations.-The main cause of collapse during masonry alterations is through overloading due to underestimating the weight of the load and over extending Strongboy’s from the wall to either avoid internal 1st floor wall damage or to gain more fitting work space as eccentrically loading an Acrow prop greatly affects the capacity.Brick Brace Applications Fit a permanent support within existing brickwork with the correct fitting access. Replace lintels, fit new cavity trays & D.P.C's at any height with ease. Strengthen lime mortar masonry even when propping and aids all remedial works, brickwork renovations & repairs.-Now in our sixth year of business with tens of thousands of Brick Brace safety tools being sold and used worldwide every year!Safety tools are fitted 3 bricks apart in a cement mortar mix, a maximum of 2.5 bricks apart within a lime mortar mix and in every perpendicular joint within block work.–Drill out the required perpendicular joint/s with a 10mm masonry drill bit. Insert the Brick Brace safety tool/s and engage fully to the angled plate. Tighten the centre screw with a 19mm socket spanner; the masonry is now reinforced and ready for safer alterations and superior results, guaranteed.THE BENEFITSProviding Further Temporary Support Options.–Guaranteed Smarter, Superior, Stronger & Safer Masonry Alterations.–Keyhole surgery for face brickwork. –Full & Safe access to the task.– Supports all of the masonry as one whole piece rather than as individual bricks as in the case when only propping, especially within lime mortar masonry.–Superior results achieved.–Versatile & Lightweight.–Raises the standards within temporary masonry works.–Also used when propping for safer & superior results.–Increases a Strongboy’s variable & unknown S.W.L.–Protection against minor collapse in-between props,especially within lime mortar masonry.–Re-instates a load point to safely reduce the weight of the load to prevent overloading Strongboy’s.–Allows a prop to be maneuvered safely during a task.–Safely reduces the number of props required.–Pays for itself within two applications.–Reduces Repair time.–No Lost or falling masonry.–Easy To Store/ Fits in a tool bag.–Reduced carbon footprint.–Designed & Manufactured in Great Britain.–30 Day Money Back Guarantee.—Use at any height, high or low.– Stabilises lime & weak mortar masonry.–Fully tested in multiples.–A Single tool only 750 grammes in weight.–Superior results and time saved GUARANTEED.–2019 Propping GuideAll tasks of masonry alterations are different and should be planned carefully upon their own merit.CHECK LIST1, what is the nature of the task, is it remedial works or fitting a permanent support? Is it forming a new opening or increasing the size of an existing opening? Is the opening in a 4″single skin of masonry, two skins or even more? Is the opening in the outer or inner leaf of a cavity wall or in both skins?– 2, what is the age and condition of the masonry and what is the masonry material? What design (cavity or solid)? What is the size of the cavity? What thickness is the wall? Which bond is the masonry and which mortar mix, cement or lime?– 3, what are the existing ceiling heights? What are the size and direction of floor/joists, are they load bearing onto the wall or are they non load bearing? Does the existing floor impede the internal fitting access?– 4, what height is the opening? Is the permanent support fitted underneath joists? Are the existing joists fitted within the web of the permanent support or is the permanent support fitted at the same height or below non load bearing joists?– 5, What masonry opening size (including bearings) is required? Is a load-point intact? What is the total weight of the load that requires support? Which variety of lintel/s or steel/s are most suitable? What’s the length, depth, width, thickness and weight of the permanent support/s?– 6, Which variety of temporary support equipment is designed to support the masonry and the weight of the load safely and also provides a safe and sufficient fitting work space without overstretching and dangerously overloading itself?–The more methods known, the safer and easier the different tasks of supporting masonry become. Temporary support equipment options in alphabetical order, Acrow props, Brick Brace, Needles, Prop-Wise and Strongboy’s?–Using a variety of temporary support equipment reduces risk, repair time and supports all of the masonry in between props and also improves the unknown variable safe working load of the existing propping methods.Brick Brace with Acrow props, Brick Brace with Needles, Brick Brace with Prop-Wise or Brick Brace with Strongboy’s and depends on the task of which variety that is most suitable.– Maximum Safe Working Loads(S.W.L)–A correctly used Acrow prop, maximum safe working load, 3,400Kg.–An Acrow prop used within the props and needles method, 1,700Kg. – When fitted with a Strongboy or any similar designed product, an Acrow props safe working load is severely reduced by at least 90%, from 3,400kg down to the maximum 340kg and can even reduce down to 0kg of which depends on the size & the working height of the Acrow prop, how plumb, how tightly fitted and how far the Acrow prop is positioned from the centre of the wall and is fully explained within this guide.–Without warning a Strongboy dangerously misuses the Acrow prop due to the severe eccentricity of the load and because the web of the Strongboy sends the load onto the side of the Acrow props inner tube of which is designed for vertical loads down the central axis only.- The Acrow prop curves and loses height when overloaded or over tightened which is the legal duty of the user not to overload and to work with an Acrow prop fitted with a Strongboy in a safe, professional and competent manner. –Did you know 10 Acrow props fitted with Strongboy’s have an identical safe working load as 1 correctly used Acrow prop.–The misleading theory behind a Strongboy is to use fewer Acrow props and to reduce masonry damage and is marketed within that manner, which certainly is not the case upon wider openings when the maximum safe working load is only a fraction (1/5) of the correct propping and needling method and when maintaining the maximum 340kg safe working load the hole within both sides of the cavity wall or a 9″ wall is actually larger than fitting a needle and with at least five times more fitting holes required than one 1,700kg safe working load needle. –A 360 degree turn of the adjustable collar raises an Acrow props working height by 8mm, jacking or over tightening can dangerously overload an Acrow prop especially when eccentrically propping with a Strongboy as the measurement from masonry to the solid base will not change, only the Acrow prop or the Strongboy will deflect, distort or alter.–The safe working load of an Acrow prop reduces when the inner tube of an Acrow prop is raised from the outer tube, ensure to use the correct sized Acrow prop most suitable for the height of the particular task.–An overloaded Strongboy solely relies on the lateral strength of the masonry to avoid collapse which is why the Brick Brace should also be used to strengthen the masonry when propping.– THE STRONGBOY INSTRUCTIONS WERE CHANGED IN NOV’ 2015–TWO SECTIONS OF THE OLD INSTRUCTIONS1(Correct)On normal cavity walls the maximum distance from the centre line of the Acrow prop to centre line of the cavity wall is 215mm ( 9″ inches) or using the leading edge of the hammer plate as a guide, measure 150mm to the centre of the cavity.2(Misleading)For a wider hole on stable walls the Strongboy’s should be positioned a maximum of 900mm apart.–TWO SECTIONS OF THE NEW COINCIDING STRONGBOY INSTRUCTIONS(Updated November 2015)1(Correct)The distance between props should be calculated from the assessment of the loading. Always use the correct number of Strongboy’s for the job.A Strongboy can be used on single or double skin walls where each leaf is up to 4 ½” (112mm) thick. If double skin, the maximum cavity is 2” (50mm).2(Misleading) Ensure the blade of the Strongboy is fully supporting the second skin.–The misleading Strongboy instructions increase the risk of the user to overload and to underestimate the weight of the load and also suppresses the true level of knowledge that is necessary to safely tackle the many different tasks of masonry alterations.–ExamplesA9″ brickwork can weigh in excess of 600kg per square metre, (120 bricks plus mortar) which would require at least five Strongboy’s per linear metre (at 167mm centre’s) upon a larger opening on a typical two storey residential property, that could weigh 1,440kg per linear metre without roof loads and making the use of Strongboy’s unsuitable & obsolete for that particular task.BA Strongboy was designed in the mid 1980’s when the typical cavity size was only 50mm but due to changes in construction design a cavity has doubled to 100mm. Attempting tasks which require wider steels with welded top or bottom plates for large cavities and still only using Strongboy’s is where further problems of overloading through over extending from the wall to gain more fitting space arise.CThe new instructions (updated Nov’ 2015) suggests that propping a 9″ wall by over 300mm eccentricity from the centre line of the wall to the centre line of the Acrow prop is acceptable even when the safe working load is reduced to an unknown level and when the Strongboy is totally dependent on the unknown lateral strength of the lime mortar masonry to avoid collapse.DWithin the new instructions there is no mention of the maximum eccentricity of 215mm. All measurements are taken from the end of the bendable and over sized tongue, “If” this was a correct method of measuring eccentric loads it is actually safer to support a 100mm cavity wall which is not permitted than a 50mm cavity wall which is permitted as the measurement from the centre line of the Acrow prop to the centre line of the wall would be 25mm less eccentric.To change instructions to suit the design of an existing product after twenty five years with no explanation or without any further testing can not be lawful when it dangerously reduces the S.W.L to an unknown quantity and also endorses further misuse of which creates a higher risk of collapse.–The Brick Brace Safety Tool, our guidance, weight charts and proven strategies address all the main causes of minor and major collapse during masonry alterations.-BRICK BRACE SETS AVAILABLE Trial SetClear access on Openings up to 1,800mm in a lime mortar mix and up to 2,250mm within a cement mortar mix. Half set Openings up to 3,150 mm (14 brick lengths), supporting all 91 bricks within the triangle of brickwork above the opening (Stretcher bond) at any height high or low, with full access to the task. Full SetThe Brick Brace safety system offers openings up to 4,500mm (20 brick lengths) when using only one Acrow prop fitted central, see photo no9. Use above openings when propping or needling to hold the brickwork in-between props and also to reduce the load.–BRICK BRACE FEEDBACKACE, FANTASTIC, EXCELLENT, A+, GREAT, 100% POSITIVE, 5 STARS,QUALITY ITEM, THIS IS A BRILLIANT BIT OF KIT"Great item, all info & weight charts etc A+""This product is simply brilliant!!! Turned a difficult job into an easy one...A1".“Great product, made life so easy, I had no dropped bricks whatsoever” A+++Excellent thank you, very fast service, can't recommend company or product enough.Extremely good seller - brick brace works so well and so quick to implement.Fast delivery brilliant tool - don't be frightened of technology!!Fantastic product Good kit. fast delivery 5*.Truly fantastic bit of kit, genuine seller and great communication.Great labour saving device.Brilliant piece of kit. Well worth the money. Thank you.Brilliant. Top job. 10/10.Cracking device..should be in every builders tool kit.Goods as described, works well, very quick delivery, recommended 5*seller.Absolutely superb. works exactly as described.first class product top ebayer.Fast Delivery, Fantastic product. Thank You A++++.great......!!!!!!!!!!!!!!!!!!Great item fast response, well packaged, recommended seller !5****** Highly recommend. Purchase and use with confidence after reading all of our ebay feedback with a full money back guarantee to anyone that doesn't benefit from its use! C.R.O.S.S. Confidential Reporting On Structural SafetyWhen carrying out temporary needling and propping one of the most important aspects is to ensure that the props are concentrically loaded and plumb.–The use of a steel bracket on top of the prop giving a minimum eccentricity of 200 mm would not seem to be such a good idea?–Interestingly such a product does exist and has proved very popular with builders who see it an advantage to prop only one side of a wall.– The prop is sold and hired from builders’ merchants with minimal safety instructions and is potentially unsafe due to bending moments being introduced by this product into Acrow props designed only for axial compression. Any device that modifies the behaviour of props by introducing bending moments is potentially hazardous.–Another reporter has come across these in use and in his view they must only be used in the case of limited openings where the masonry can arch over leaving only a small triangle of masonry below the arching that can potentially break away. –All in all these are for light use only and never for heavy shoring. The reporter thinks that the manufacturers, and possibly the hire companies, would be negligent if they did not provide some guidance on the use of such props.–Another reporter has frequently seen builders using props with cantilevering head-plates which cause the supporting props to bend. Some years ago he photographed a set of such props which had very noticeable curvatures. The wall above had dropped in consequence causing damage to the building and resulting in a substantial claim against the builder. The reporter generally advises builders not to use such head-plates.–Correct propping is essential and temporary works failures are a recurrent theme on site. It appears that this type of prop head should only be used in specific low risk circumstances.- Purchase and use with confidence after reading our feedback & reviews.BRICK BRACE.01895 5464052018 propping guide available to read/print via our website FREQUENTLY ASKED QUESTION’S–Why use the Brick Brace when Strongboy’s are so easy?–Due to every task of supporting masonry being different, a variety of temporary support equipment most suitable should be used. A Strongboy should only be used where on small openings at a maximum of 3 metres from a solid base and when fully supporting the masonry and the weight of the load safely and correctly and when also offering sufficient access to the task, which is why we created the non intrusive Brick Brace safety tool and safety system for further options.–But doesn’t everyone misuse Strongboy’s?–We know safer methods and also provide guidance to help, teach and influence the majority to change their bad habits and to help prevent the same needless reoccurring accidents.We do not endorse the misuse of any temporary support equipment but anyone that continues to overload Strongboy’s through over extending from the wall to avoid internal 1st floor wall damage or to gain further fitting space we highly recommend bracing the masonry beforehand to reduce the risk of minor and major collapse, especially within lime mortar masonry. –What does the Brick Brace do?–The Brick Brace pre-stresses the masonry to prevent collapse, allowing openings within existing 4″ masonry up to 3,150mm (14 Brick Lengths) without the use of any impeding Acrow props at any height high or low and enhances all the traditional propping methods to reduce the risk of major collapse and stops minor collapse in between props.The stability & strength of masonry is unknown and varies upon every task of which depends on the mortar mix, the quality and the age of the masonry. The fully tested Brick Brace safety tool increases the unknown variable strength of masonry to 40Nm which through testing is proven to be strong and stable enough to prevent minor & major collapse during alterations.The Brick Brace, our guidance, weight charts and proven strategies address all the main causes of minor and major collapse during masonry alterations.–Why is the Brick Brace not in the Shops?–The vast majority of retailers do not fully understand temporary masonry support and do not know how to sell the equipment safely & correctly.We have raised the safety standards within temporary works and until retailers prove to us they have also raised their standards and learn how to sell their existing temporary support equipment safely we will continue to sell direct to the end user to ensure the correct level of guidance is provided. –What Law?–Construction, Design and Management 2015, in force since the 6th April 2015 and is British legislation.Temporary Works in BriefThe builder (contractor) must ensure they have the necessary skills and knowledge and are capable of avoiding risks and able to combat risks at source. Adapt to individual requirements, especially regarding the design of the workplace, the choice of work equipment and the choice of working and production methods with a view in particular to reduce the effect of risk on health and on safety. Adapt to technical progress, replace the dangerous by the non-dangerous or the less dangerous. Regulation 19 Stability of structures All practicable steps must be taken to prevent danger and ensure that any new or existing structure does not collapse or become unstable due to the carrying out of construction work. Temporary support must be designed, installed and maintained to withstand foreseeable loads and only used for the purposes for which it was designed for. A structure must not be loaded as to render it unsafe to any person.–Work within health and safety guidelines; respect your legal responsibilities and the welfare of others around you.–How do I support the internal skin of a cavity wall when using the Brick Brace externally?–Every task of supporting masonry is totally different and must be calculated upon its own merit.When possible prop the internal separately, Where it is not possible to prop the masonry internally due to impeding floor joists, the correct method of props and needles should be used over the joist height which offers the safest fitting space without dangerously overloading the equipment. The Brick Brace can be used over the opening to support the masonry in between props and to raise the unknown variable safe working load of the equipment used.– How far from the corner of a building can the Brick Brace be used?–When used without also propping the Brick Brace safety tool/system is designed to support the triangle of masonry above an opening and requires a minimum of one brick as a reveal or from a corner as theoretically the load is transferred to either side of the opening.Upon a typical two storey residential property where no reveals remain to either one or both sides of an opening, the whole storey height over the opening requires support (including roof loads if they apply) and the traditional props and needles method should be used to reduce the high number of low safe working load props and strongboy’s that would be necessary.The props and needles method also gives the correct space to fit wider permanent supports safely without dangerously removing the opening to the full depth before the permanent support is in position.Removing an opening down to the full depth before fitting the permanent support increases the risk of collapse through accidental removal of props during demolition and should be avoided.–Why use a scaffold tube?–A scaffold tube connects each individual safety tool to the next with all the single tools becoming one piece, sharing the load equally over the length of the opening and building a temporary pre-stressing lintel inside the brickwork to ensure no movement when the masonry is removed from below. Why use the area required for access with low S.W.L Strongboy’s when the surrounding structure can be fitted with a temporary pre-stressed lintel from above?–Where are The Brick Brace fitted?–Within the course directly above a proposed opening and fitted three bricks apart in a cement mortar mix, a maximum of two and a half bricks apart in a weak or lime mortar mix and within every perpendicular joint upon Block work.– Will the force of the Brick Brace push out the Brickwork?–Not at all, the fully tested Brick Brace safety tool uses only a fraction of the force required than when propping. A torque of 40Nm produces a force more than enough to brace and support the masonry even allowing for some fall off in force as the tools bed in, (Factor Of Safety X 3). The torque is also readily achievable on site with a ratchet spanner and provides a force well below that to crush the face of the brick, with no distress whatsoever and with no visible movement or cracking.– How can the Brick Brace reduce Acrow props and Strongboy’s?–Single Brick Brace safety tools are used to re-instate a load-point which safely reduces the weight of the load that requires support. Within a typical two storey residential property correctly used props are under-loaded when positioned at 900mm centre's when a load-point is intact, therefore props can be positioned at 1,350mm centres when single safety tools are fitted in between props, this safely reduces the number of props by 50% from the work area.–Why is Eccentrically loading an Acrow prop hazardous?– An Acrow prop is designed to be loaded on the axis, (from head plate down to foot plate only). Fitting a Strongboy reduces the safe working load of an Acrow prop by at least 90% (a difference of approx 3,060 kg) due to the web of the attachment sending the load onto the side of the Acrow props inner tube.The inner tube curves and loses height when overloaded which is the legal duty of the user not to overload and to work with an Acrow prop fitted with a Strongboy in a safe,professional and competent manner.–What tools are required to fit the Brick Brace?–To fit a single safety tool you require the use of a hammer drill with a 10mm masonry drill bit to remove the perpendicular joint and a 19mm socket spanner to expand the Brick Brace. The Brick Brace system requires a Hammer Drill, 8mm and 10mm masonry drill bits, 15, 19, 21mm sockets and a ratchet. The 40Nm torque required to expand the Brick Brace is similar to tightening a scaffold fitting. To remove the masonry below use a disc cutter and a light set hammer drill with the correct chisel fittings, a masonry or traditional hand saw is sufficient for lime mortar mixes, full instructions and a correct procedure are provided and available to read or print via our instructions/download page.–Can the Brick Brace be used on load bearing walls?–Of course, Acrow props and spreader plates should always be used to prop load bearing joists and beams to support the different possible live and static loads they may be carrying.As with a Strongboy the Brick Brace safety tool is not a substitute when a concentrically loaded Acrow prop is more suitable. Position props a maximum of 600mm from the wall when supporting joists giving enough room to work. The condition of Joists and beams must always be checked before propping, please read our 2019 propping guide for further information on the correct use of an Acrow prop.–Does the Brick Brace have certification?–There is no certification, British standard or kite mark available for any temporary masonry support equipment as it’s not a permanent fixture and only temporary. The Brick Brace Safety tool was fully tested in multiples and complies with the provision and use of work equipment regulations.–Does the Brick Brace have a guarantee?–Anyone that uses the Brick Brace safety tool that does not benefit from its use we promise a full money back guarantee. We ensure every user has the information to tackle every task safely. We supply full instructions, a correct procedure with a further help-line so no assumptions of use need to be made. We have studied temporary support for many years and our fully patented method of strengthening masonry is the further preparation required for safer and superior results.-WARNING!A Class System Is In Place;To please a client an architect has the artistic freedom to design & draw any new opening size they wish within existing masonry with a few lines and a rubber and with no care of how it is done in real life, a structural engineer then provides a method of using Strongboy’s that may save on costs but also compromises safety as the method doesn’t give the correct fitting work space without dangerously overloading itself, the builder/contractor then purchases or hires Strongboy’s to avoid internal wall damage of which is sold by a vast majority of retailers with zero masonry alterations knowledge and when the obvious accidents of overloading continue to reoccur only the builder/contractor is at fault and fined or even imprisoned for corporate manslaughter when collapse causes a fatality.–We recently asked the institute of structural engineers;“How is it possible for a structural engineer to design a task safely with Strongboy’s when the safe working load varies from 340kg down to 0kg of which depends on the size of the Acrow prop used, which pin-hole height is used, how tightly the Acrow prop is fitted, how plumb and how far the Acrow prop is fitted from the centre of the wall”?&“Can you confirm that the new instructions of a Strongboy are acceptable and do not require any revision? And can you also confirm the market monopoly of the Strongboy and the misleading instructions have not fixed the typical builders and retailer’s mind-set and stopped further and essential temporary masonry support equipment join the market place”?THEIR RESPONSE“The Health and Safety Panel has discussed in great detail and over many e-mails the comments that you have raised. The Panel has taken the time to discuss the situation and the position of the Institution. With that the Panel thanks you for your query.As a learned society the Institution exists to promote the art and science of structural engineering and does not comment on the efficacy of proprietary products.”–The H.S.E also refuse to answer any of our questions.–Not commenting on the dangers of a Strongboy is why collapse is such a reoccurring theme on site. Endorsing and promoting the Strongboy by designing temporary works with the product when they’re not suitable for a task and not providing warnings or correct procedures in writing to the paying contractor and also allowing misleading instructions is far from a science or an art form, only dangerous & incompetent.–A qualified structural engineer didn’t attend university to design inferior temporary support works so why have IstructE, the temporary works forum and the H.S.E made it strangely acceptable to prop the rear of a property on a number of over loaded mild steel bendable tongues that sit eccentrically upon a misused Acrow prop and when the obvious accident’s continue to reoccur it’s only ever the contractor that’s at fault?–Back in 2013 the H.S.E website stated that the main cause of collapse during masonry alterations was from overloading equipment due to the lack of awareness of the equipment capacity and underestimating the weight of the load.–Through our own research the causes of collapse during alterations are also due to the following;1, The user making assumptions of correct use due to not understanding the misleading Strongboy instructions or verbally misinformed of how to use the equipment safely.–2, Unknowingly decreasing the safe working load when removing a Strongboy from the wall to avoid internal wall damage and/or to gain further fitting work space as no warning of this is in place.–3, A Strongboy being recommended, endorsed and permitted by structural engineers even when the device is not most suitable for a particular task and when not giving the correct fitting work access without dangerously overloading itself.–4, No written guidance for Acrow props, Strongboy’s or Genie lifts are provided by retailers to falsely ease a dangerous task to gain more sales and misguiding videos on you tube where Strongboy’s are being overloaded and dangerously misused.–5, The user making assumptions of correct use due to no warnings or guidance being provided at the point of sale or hire by the majority of retailers.–6, No correct procedures of using a Strongboy are in place for the many different tasks of supporting 4″, 9″& 13″ walls or for the different sized cavity walls and also due to a severe lack of temporary masonry support information & guidance from the H.S.E.–7, Using Strongboy’s upon larger openings when the props and needles method is far safer and more suitable as they offer the correct fitting work access with fewer impeding Acrow props without dangerously overloading & without having the need to remove the opening to the full depth before a permanent support is in the final position.–8, Compromising safety to save time and to reduce costs by propping dangerously from only the external side to avoid internal wall damage upon finished 1st floor rooms.–9, A severe lack of temporary masonry support knowledge by not knowing how to safely plan a task prior to commencement and taking unnecessary risks due to not using a variety of temporary support equipment most suitable for the task.–10, Insufficient testing and research of the Strongboy and of similar designed products.–11, Rushing a task through not pricing correctly.–12, Not seeking expert temporary support advice when in doubt.–13, No drawings of correct use are provided and no Acrow prop guidance supplied at the point of sale or hire by retailer’s.–14, the H.S.E allowing misleading instructions for over twenty five years and allowing a product to be sold without any warnings or guidance to financially gain from the fines.–15, The market monopoly of a product with a brand name that implies strength but reduces the safe working load of an Acrow prop by at least 90% without any warning or testing upon the different sized Acrow props and is overloaded with the same amount of ease as the manufacturer’s & retailers say it is to use.–16, A product that is designed to deceive and to be misused and also increases the risk of overloading due to the long bendable tongue that easily exceeds the maximum 215mm eccentricity without any warning.–17, The Strongboy manufacturer making false claims and devaluing the correct method of props and needles for over thirty years.–18, Misleading new instructions that have increased the eccentricity by over 50% without any further testing, warnings or explanation.–19, The lack of awareness that every task is totally different and not knowing that a variety of temporary support equipment is required to tackle every different task of masonry alterations safely and correctly.–20, Not using the fully tested Brick Brace safety tool to maximise the unknown variable safe working load of the existing propping methods to reduce the risk of minor and major collapse when propping.– Authority without knowledge is dangerous to the public!–In their own words, the role of the H.S.E is to provide advice, information and guidance, to raise safety awareness, to Inspect, investigate and to take enforcement actions.–The H.S.E have failed within temporary masonry support works and future generations are also only one lesson away from misusing Strongboy’s as they are taught by misleading instructions and by the majority of structural engineers, retailers and builders that think it’s acceptable to overload & misuse Strongboy’s.Thank you for reading,Keep It Safe,Brick Brace.Watch our video via our website or on you tube, presented by Skill Builder Roger Bisby. Visit Our ebay shop for discounts & further listings Condition: New, Brand: Brick Brace, Custom Bundle: No, Non-Domestic Product: No, Modified Item: No, Model: BRICK BRACE SAFETY SYSTEM FULL SET, Item: Tools, Type: TEMPORARY MASONRY SUPPORT, Country/Region of Manufacture: United Kingdom, Bundle Listing: No, MPN: Does Not Apply

voltestobuild.com Insights voltestobuild.com Exclusief
  •  Populariteit - 7.423 bekeken, 29.0 views per day, 256 days on eBay. Super hoge hoeveelheid van bekeken. 23 verkocht, 30 beschikbaar.
  •  Prijs -
  •  Verkoper - 939+ producten verkocht. 1.1% negatieve feedback. Grote verkoper met zeer goede positieve feedback en meer dan 50 ratings.
Vergelijkbare producten Items
Sitemap